BURIED AND UNDERWATER CABLE INSULATION WATERPROOF BOX (1KV AND BELOW)
Suitable for all low-voltage power sources,communication cables and signal cables.
Using insulation and waterproof sealant casting technology,easy and fast installation.
Advanced cable branch joints,saving space and cables.
Excellent waterproof effect and excellent mechanical protection.
There is no need to return the line,which greatly saves the main line costs.
Buried directly in the ground without digging wells,saxing cables and civil construction costs.
It is safe and reliable, no need to repair, reducing a lot of maintenance costs.
Produst installation instructions
1.To avoid the short circuit,after connecting the cable,then use the matching insulating electrical tape to wind the single cable's interface for preliminary insulation to prevent the cable interface from sticking together(This product belongs to cable connection method)
2.Removing the double-sided adhesive on the sponge.
3.If the outer diameter of the cable is larger than the original inlet of the enclosure, the position should be selected according to the scale size at both ends of the enclosure to cut off for continued installation.
4.Wrap the sponge strips around both ends of the cable, the position should be consistent with the entrance of the enclosure, sponge strips should be half inside and half outside the shell(As shown above)Then buckle the shell, each buckle should be forced tight.
5.Stretch the insulation self-adhesive tape 2-2.5 times and force it around both ends of the box and check whether there is any gap in the position of the incoming and outgoing lines on both sides to prevent the subsequent injection of sealant leakage.
6.Complete all the steps, mix up the sealant according to the specification, straigten out the box, pour into the sealant and close the cover, after the sealant is completely solidfied,it can be buried underground or placed underwater.