Basic Info.
Connector Type
FC/PC (Interchangeable Sc, St)
Application
FTTH FTTB FTTX Network
Product Name
Hand-Held FTTH Power Meter
Dimensions
190 *100 *48 or 165*75*28mm
Specification
w600*d900*h2000mm
Product Description
SummaryHandheld light power meter series products are mainly used for continuous optical signal power measurement. It adopts single chip microprocessor to control, and has complete functions. Widely used in optical fiber construction and maintenance, optical fiber communication, optical fiber sensing, optical CATV and other fields. The fuselage design Ergonomic requirements, the use of advanced cold molding process, beautiful and durable. The built-in detector allows it to be well protected. With a small shape, optional switch, background light display and automatic shutdown function, ultra wide optical power testing range.Note: the version of the instruction is subject to change without notice.Product characteristicsSupport linear (mW) and nonlinear index (dB) simultaneous displaySupport automatic shutdownSupport on / off background lightSupport user self calibrationSupport SC, FC interface, ST interface (apolegamy)Charging unplugged working time 48 hours (apolegamy)Support portable battery / computer power supply (apolegamy)Support wavelength memory functionSupport optical fiber work identificationTechnical indexWavelength range | 800~1700 |
Connector | FC/SC/ST(ST apolegamy ) |
Type of Detector | InGaAs |
Power measurement range | -70~+3 or -50~+20 |
Uncertainty | ±5% |
Standard wavelength (nm) | 850,980,1300,1310,1490,1550,1625 |
Display resolution | Linear indication:0.1% Logarithmic indication:0.01dBm |
working temperature (ºC) | -10~+60 |
Storage temperature (ºC) | -25~+70 |
Auto off time (min) | 10 |
Battery Working Time (h) | ≥48 |
Instrument size (mm) | 190 *100 *48or165*75*28 |
Power Supply | No. 5 battery *3 or rechargeable lithium battery |
weight (g) | 300/400 |
Note:1,Range of wavelength: a standard working wavelength that we specified: min-max, the optical power meter within this range can work well with all indicators meeting requirements.2,Power measurement range:the maximum power that the meter can measure as per required indicators.3,Uncertainty: the error between the test results and standard test results over a standard optical power .Button description1,Turn on / offPress the button to start within a second, then press the button to turn off the power.2,AUTO/OFFPress the key to turn off or turn on the automatic shutdown function, and the upper left corner of the LCD will display the prompt at the same time.3,ZEROPress the key to realize the automatic clearing of the optical power meter.4,LIGHTPress the key can close or open background light; LCD top left corner can show the hint at the same time.5,dBThe relative measurement of optical power can be carried out at the corresponding wavelength.6,7 ,different wavelength optional (850nm,980nm,1300nm,1310nm,1490nm,1550nm,1625nm) LCD showing at the same time.Screen display instructionsThe tested power are shown with the forms of dB,dBm,mW,uW,nW; there are 7 types to show wavelength.Calibration function descriptionAt the same time press the "LIGHT" + button, then enter the user mode, the lower right corner of the screen shows the letter "CAL", the following function is in the combination button pressed after effective.Function | Push-button | Comments on a form |
Increase 0.05dB | dB | *1.01158 |
Reduce 0.05dB | LIGHT | *0.99855 |
Preservation | ZERO | Press the boot button(Store to flash) |
Switching wavelength | | |
Restore factory settings | +ZERO | Display "FAC", The default value is also read into the array. |
Measurement of relative power and absolute power1,Absolute powerIf the 1310nm wavelength is chosen, the screen will show the present value, including linear value of absolute light power and non-linear value when the tested light is connected.2,Relative powerWhen the wavelength is set, in the mode of absolute light power, connects the tested light to test the present power value. dB is pressed at this moment and the present power value is reference (dBm is unit). Another tested light is connected and the absolute and relative power are shown.Standard configurationThe host, light power meter product warranty card, certificate, instructions, Oxford roolls (apolegamy), three 5 dry cell batteries (apolegamy), lithium battery (apolegamy), charger, adapter (apolegamy) (SC and FC standard, ST apolegamy).Charging function (apolegamy)Battery indicator does not display the work, when the power is not enough to provide normal work, power index every second flash once, 10 seconds after the automatic shutdown, then do not start again, with the power adapter is equipped with charging after the boot.Solutions to common faultsMalfunction Tips | Cause | Solution |
LCD monitor weak | Insufficient power | Charge or change battery |
Could not display when starting | Lack of power or other | Restart machine or charge, change battery |
abnormal data display of LCD | Adapter fault, dirty or be locked | Reconnect adapter and clean sensor |
Routine maintenance and maintenance1,Please keep cleaning of the sensor frequent and there should be no fat, no pollution and not use dirty and not standard adapter. Do not insert the end face of bad polished surface, or it will damage the end face and there will be error in testing.2,Stick to an adapter as much as possible.3,Once the machine is unused, please cover the dust cap to keep the end face clean prevent from exposing in the air and prevent from attaching the dust which leads to the wrong measurement .4,Carefully plug optical adapter connector to avoid port scratches.5,Clean the sensor surface periodically. When cleaning the sensor surface, wipe it gently in the circumferential direction with a special cleaning swab.Quality Guarantee1, Within twelve natural months after the user receives the goods, our company will promise the quality and workmanship of its products. The warranty period is within twelve months from the date of receipt: when the purchased product is found to have quality problems during this period , Our company will make corresponding treatment or replacement, but under any circumstances, our responsibility will not exceed the purchase value of the product. 2,If the instrument has something wrong when using and it is unsolved with the common malfunction solution, users are forbidden to open the shell and contact with our company.3, As to the malfunction made by the disadvantage of the product, our company will be in charge of repairing or changing product for free.Note: the guarantee is only suitable in the normal instrument under the situation of no damage and no wrong operation, our company will repair or change freely if the mistake is made by quality or disadvantage of material. As to accident or improper usage or repair without authorization, our company has right to reject the guarantee.
Address:
Office 2902, No. 4 Yunxi Rd., Licheng Street, Zengcheng District, Guangzhou, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Computer Products, Electrical & Electronics, Industrial Equipment & Components
Company Introduction:
Guangzhou CST Technology Co., Ltd. Is a subsidiary of Huizhou YHT Broadband Equipment Co., Ltd. Provide fiber optic terminal box, patch panel, distribution box, ODF, FTTH box, splice closure, optic splitter box, cabinet, connector, patch cord, pigtail, adapter, PLC splitter etc.
Its headquarters Huizhou YHT Broadband Equipment Co., Ltd. Is a national high technology enterprise located in YHT industry park and certified by ISO 9001: 2015 management system, ISO 14001: 2015 envoronmental management system, OHSAS 18001: 2007 occupational health and safety management system, GB/T 29490-2013 intellectual property management system, TLC etc. There are hardware, diemaking, injection moulding, painting, assembling, fiber optic cable production, connector & Cable assembling workshops for producing fiber optic splicing, connection, distribution and termination products.
We have strong R& D ability and well-experience technical person for supporting customized fiber optic products.
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.